Get Your Car Parking Sorted with Free Shipping on 4-Sensor LED Reversing Display

US Imposes Duties on Chinese Solar Panels Made with Certain Components

The U.S. Department of Commerce has imposed steep tariffs on importers of Chinese solar panels made from certain components. The agency has determined that these manufacturers have benefitted from unfair subsidies. The tariffs imposed range from 18.56% to 35.21%. This decision is a result of a trade dispute that has been ongoing for some time and addresses one of the primary charges made in a petition filed by SolarWorld Industries America. While this decision is preliminary, it will allow the U.S. to begin collecting tariffs in advance of a final decision that is expected later this year. Experts say that the decision is likely to intensify the trade war between the U.S. and China. It will also have a significant impact on the solar industry in both countries.The decision is a victory for SolarWorld, which has long argued that Chinese manufacturers were flooding the market with cheap solar panels. The company has claimed that these panels were being sold for less than the cost of production due to the subsidies received by Chinese companies. This, in turn, has driven down prices and made it difficult for U.S. manufacturers to compete.SolarWorld is one of the largest solar panel manufacturers in the U.S. The company has operations in Oregon and California and it employs around 800 people. The company was founded in 1975 and has been involved in the solar industry since the 1980s.The decision will have a significant impact on Chinese solar manufacturers. These companies have become some of the largest producers of solar panels in the world. The Chinese government has invested heavily in the industry, providing substantial subsidies to many companies. These subsidies have allowed Chinese companies to sell their products at lower prices than U.S. companies, which has hurt the U.S. solar industry.One of the biggest Chinese solar companies is (name of company removed). The company was founded in 2006 and has grown quickly since then. It is now one of the largest solar panel manufacturers in the world, with operations in China, Europe, and the U.S. The company employs more than 30,000 people and had revenues of over $12 billion in 2019.(name of company removed) has not yet commented on the decision by the Commerce Department. However, experts say that the tariffs are likely to have a significant impact on the company’s operations. The company may try to raise prices to compensate for the tariffs, but this could hurt its competitiveness in the market.The decision is likely to have broader implications for the solar industry worldwide. Many countries, including the U.S. and China, have set ambitious targets for increasing the use of renewable energy. Solar power is a key component of these plans. However, the trade dispute between the U.S. and China has slowed the growth of the industry in both countries.Some experts worry that the tariffs imposed by the U.S. could lead to retaliation by China. The Chinese government may decide to impose tariffs on U.S. solar companies, which could hurt U.S. manufacturers and make it more difficult for them to compete in the global market. This could have a negative impact on efforts to increase the use of solar power worldwide.Overall, the decision by the Commerce Department is likely to have significant implications for the solar industry in both the U.S. and China. While the tariffs will provide some relief for U.S. manufacturers, they could also lead to retaliation by China, which could hurt the industry as a whole. It remains to be seen how this trade dispute will be resolved.

High-Quality Solar Street Lights for Sustainable Lighting Solutions

China Solar Post Light: The Future of Street LightingWith the increasing concerns about the impact of traditional street lighting on our environment, there is a growing need for sustainable, energy-efficient lighting solutions. Solar street lights have emerged as one of the most promising options in this regard. In this blog, we will discuss the benefits of solar post lights and how they can revolutionize street lighting in China.What are Solar Post Lights?Solar post lights are a type of solar street light that combines a solar panel, battery, controller, and LED lights in a single unit. The lights are installed on top of a pole, which can range from 3-8 meters in height, depending on the area to be illuminated. The solar panel is mounted on the top of the light fixture to capture sunlight during the day, which is then converted into electricity and stored in a battery. This stored energy is used to power the LED lights at night, providing bright, energy-efficient lighting without the need for a power grid.Benefits of Solar Post Lights1. Cost-effective: Since solar post lights operate independently of the power grid, they can save on electricity costs over time. Once installed, they require almost no maintenance and have a lifespan of around 20 years.2. Energy-efficient: Solar post lights are powered by clean, renewable energy from the sun. They generate zero emissions and have a minimal carbon footprint, making them a sustainable choice for street lighting.3. Easy to install: Solar post lights do not require any wiring or trenching, making them easy to install in remote and hard-to-reach areas. They also come with a variety of mounting options, including pole, wall, and surface mounting.4. Versatile: Solar post lights can be used in a wide range of applications, including residential streets, highways, parks, and parking lots. They are also available in a variety of styles and colors to complement any architectural or landscaping design.5. Increased safety: Solar post lights provide bright, reliable lighting that can improve visibility and safety in public spaces. They can also reduce the risk of accidents and crime by illuminating dark and secluded areas.The Future of Street Lighting in ChinaChina is one of the fastest-growing markets for solar post lights and other sustainable lighting solutions. With its vast geography, diverse climate, and growing population, the country is facing significant energy and environmental challenges. According to a recent report, China's annual CO2 emissions in 2020 were 14.09 billion tons, accounting for 27% of the world's total. To address these challenges, China has set ambitious renewable energy targets and is implementing policies to encourage the adoption of clean energy technologies.In this context, solar post lights can play a crucial role in reducing China's carbon footprint and improving the quality of life for its citizens. With their cost-efficient, energy-efficient, and versatile design, these lights can provide bright, reliable lighting in even the most remote and off-grid locations. In addition, they can help China achieve its goal of becoming a global leader in renewable energy and sustainability.ConclusionSolar post lights are a simple yet powerful solution for street lighting in China and around the world. They offer numerous benefits, including cost-effectiveness, eco-friendliness, flexibility, and safety. As China continues to advance its clean energy agenda, solar post lights will become an increasingly vital component of its sustainable future. By investing in these innovative lighting solutions, China can create a brighter, more resilient future for its citizens and the planet.

Tutorial: Disabling TPMS in Saab Vehicles with OBD Scan Tool

As technology advances, more and more vehicles are equipped with Tire Pressure Monitoring Systems (TPMS). GM Saab vehicles are no exception. Although TPMS is designed to ensure safety, it can be a nuisance for mechanics or owners when trying to perform maintenance or install new tires. Here, we will explain how to disable TPMS on a GM Saab vehicle using a GM Tech2 scanner.Equipment Needed:1. GM Tech2 scanner2. CANdi interface (CANBUS)3. 32 MB PCMPIA memory card4. Subscription Saab TIS2000 software CD5. A laptop with wireless internet (need to remove the brand name)Step 1: Install the Saab TIS2000 softwareBefore you begin the process, you need to have the Saab TIS2000 software installed on your laptop. If you do not have it, you will need to purchase a subscription CD from GM. Once you have the software, install it on your laptop. It will take a few minutes to complete the installation.Step 2: Connect the EquipmentConnect the CANdi interface to the GM Tech2 scanner and the PCMPIA memory card to the Tech2 scanner. Then, connect the Tech2 scanner to your laptop with the wireless internet.Step 3: Turn on the Tech2 ScannerTo turn on the Tech2 scanner, insert the PCMPIA memory card into the scanner and press and hold the power button. Once the scanner is turned on, it will begin to load the Saab TIS2000 software.Step 4: Enter Vehicle InformationSelect the Saab model you are working on from the menu. Then, enter the vehicle identification number (VIN) and confirm it is correct.Step 5: Disable TPMSOnce you have entered the vehicle information, select TPMS from the menu. This will bring up the TPMS settings for the vehicle. Find the option to disable TPMS, and select it. The scanner will prompt you to confirm that you want to disable TPMS. Confirm your selection, and the TPMS will be disabled.Step 6: Exit the ProgramOnce you have disabled TPMS, you can exit the Saab TIS2000 software. Turn off the Tech2 scanner by holding down the power button for a few seconds.In conclusion, disabling TPMS on a GM Saab vehicle with a GM Tech2 scanner is a simple process that can be done in just a few steps. With the right equipment and software installed, it can be an easy task to perform. However, it is essential to remember that disabling TPMS can compromise the safety of the vehicle. Therefore, it is imperative to make sure that you understand the consequences before disabling TPMS on any vehicle.

Rear Audible Parking Sensors: A Guide to Finding Your Color Code

Park Safe Parking Sensors: The Perfect Solution for Safe ParkingAs car owners, we all know how important it is to keep our vehicle in a good condition. From consistent maintenance to making sure we don’t get into any accidents, taking care of our car is an essential part of our daily lives. One of the most significant challenges while driving is parking, especially in tight or challenging spots. You may have tight spaces, roadblocks or obstacles that may create a problem. No worries, Park Safe Parking Sensors offers the perfect solution to alleviate all your parking issues.Park Safe Parking Sensors use ultrasonic sensory technology to detect any obstacle or object around your vehicle while parking. This technology, also known as asymmetrical technology, is widely used by car manufacturers such as Mercedes Benz. With ultra-wide detection of 160 degrees horizontally and 60 degrees vertically, they cover 100% compared to conventional parking systems. Park Safe Parking Sensors are made to a high quality, ensuring a quality system that is reliable.The Rear Parking Sensors provided by Park Safe are designed to activate automatically when the reverse gear is selected, providing safety and convenience to the driver. The distance is indicated by a sequence of beeps through a piezo beeper (additional digital display optional). The louder and faster the beeps get, the closer the obstacles get. When the car is within 30cm of an obstacle, it indicates this with a continuous tone. This system allows you to watch your mirrors with full attention and reverse safely, providing you with increased safety and confidence.At Carkitme, the appearance of our cars is essential to us, and we understand that it is important to our clients too. That’s why we offer to paint the sensors professionally to your vehicle’s colour code before installation. If for any reason we get it wrong, we will redo it because we understand that the appearance of our work can be as important to you as its function.Park Safe Parking Sensors also feature an adjustable extended zone that allows the system to see past obstructions such as tow bars. This innovative technology provides an extra level of control and makes parking much easier and more efficient.The Park Safe Ultrasonic Reverse Parking Sensor system scans the area behind your vehicle during reversing procedures, warning you of other vehicles or objects within close proximity. This feature is especially beneficial during night time, wet and dimly lit conditions.In summary, Park Safe Parking Sensors are an essential addition to any car owner’s vehicle. They provide faster, easier and more confident parking, protecting you from accidents and inconvenient incidents. The safety, convenience and efficiency features offered by Park Safe Parking Sensors make parking a breeze, even in challenging and tight spots. At $350 installed, it is an affordable solution to parking woes. Don’t hesitate to contact us at 0410 413 314 for further information about our products and services.

How to Retrofit Parking Sensors in Your 2008 Hatchback: A Guide

If you own an older vehicle, you may be wondering if it's possible to retrofit parking sensors. If you have a 2008 plate hatchback, you may be considering the possibility. In this post, we will discuss the process of retrofitting parking sensors into your car and how much it will cost you. We'll also cover the benefits of having parking sensors and if you should consider it.Can You Retrofit Toyota Parking Sensors?The answer is yes, you can retrofit parking sensors into your Toyota hatchback. However, it isn't as simple as buying the sensors and installing them into your car. You would need to purchase the sensors, drill holes for the sensors, and wire them to the car's electrical system. Some newer cars may have the wiring already set up for parking sensors, but this isn't always the case for older vehicles. Typically, the sensors need to be wired to the reverse light system so that they turn on when the car is put in reverse.Aftermarket kits are available that make the installation process easier, but it's still recommended to have a professional install them for you. This is because drilling holes in your car without proper knowledge could potentially damage the car's structural integrity.Rear Parking Sensor CostThe cost of retrofitting rear parking sensors in your Toyota hatchback will vary, depending on various factors. Typically, the cost of the sensors will be anywhere from $50 to $150, depending on the quality of the sensors. If you purchase an aftermarket kit, this can add an additional cost of about $30 to $50.Installation costs will also vary depending on your location and if you choose to have the installation done by a professional or DIY installation. Professional installation can cost anywhere from $200 to $400, while DIY installation can be less expensive if you have the tools and the know-how to complete the installation.Benefits of Rear Parking SensorsRear parking sensors provide many benefits for car owners. First and foremost, they can help you avoid accidents when backing up. Rear parking sensors are particularly useful in tight spaces, where visibility may be limited. They can also help you park faster and more accurately.Additionally, parking sensors can help you save money in the long run. Parking sensors can help you avoid accidents, which can result in costly repairs. Also, having parking sensors installed could help you save money on your car insurance, as some insurers offer discounts for vehicles equipped with certain safety features.ConclusionRetrofitting parking sensors into your Toyota hatchback is possible and can provide you with numerous benefits. Having parking sensors installed can help you avoid accidents, park more accurately, and save money in the long run. Before deciding to install rear parking sensors, be sure to weigh the costs of installation and the benefits you'll receive. It's recommended to have a professional install them to ensure they are installed correctly. With the technology available today, retrofitting parking sensors has never been easier.

2.5K Mirror Dash Cam with Voice Control, Dual Front and Rear Cameras for Cars, Enhanced Night Vision, GPS, Parking Assistance and 12 Touch Screen Monitor

Revolutionary AFM System for Accurate and Easy Atomic Force Microscopy

Park Systems Continues to Lead in the Manufacturing of Atomic Force Microscopy SystemsPark Systems, a world-renowned manufacturer of innovative and cutting-edge measurement instruments for nanoscale research, continues to lead the way in producing atomic force microscopy systems (AFM System). With over two decades of experience designing and manufacturing AFMs, Park Systems has become a trusted partner to researchers and users worldwide.Park Systems’ AFM System provides unparalleled accuracy and easy-to-use features, offering researchers new levels of precision. The system’s advanced technology resolves the finest details and produces high-resolution images of the nanoscale materials with ease.Revolutionizing AFM TechnologyPark Systems’ AFM System provides revolutionary features that significantly enhance research capabilities. The system boasts automatic alignment and tip engagement, allowing for improved efficiency and accuracy. Additionally, it's designed with the latest technology to produce more accurate and faster results.Furthermore, the AFM System is user-friendly and intuitive, making it ideal for both novice and experienced researchers. Its simple, yet powerful interface allows researchers to easily manage their experiments and produce top-quality results.Continued InnovationPark Systems’ continuous innovation has propelled the company to the forefront of many scientific research fields. The company frequently collaborates with leading research universities worldwide, driving advancements in nanotechnology.Recently, Park Systems announced the launch of its all-new BioAFM system, a breakthrough innovation that enables researchers to visually understand biological systems in unprecedented detail. The company’s BioAFM system is equipped with a unique low-noise scanner, allowing researchers to study biological systems without damage.Partnerships and SupportPark Systems maintains an extensive network of partnerships with leading research universities and institutions worldwide. The relationships empower Park Systems to develop next-generation measurement instruments aligned with evolving scientific needs.The company also provides extensive support to its clients, including training and publications. Park Systems regularly organizes scientific workshops, user meetings, and webinars, which enable researchers to explore the latest measurement technologies and share knowledge.ConclusionPark Systems continues to push the boundaries of innovation in AFM technology, enabling researchers to achieve new levels of precision and produce extraordinary results. With the company's continuous focus on research collaboration and development of innovative products, Park Systems is poised to transform the nanotechnology industry and promote the next generation of scientific discovery.

Universal Head-Up Display for All Car Models - Displays Essential Driving Data

The Universal Head-up Display (HUD), also known as a windshield projector, is a revolutionary technology that is making life easier for drivers across the world. This technology has been designed to display driving data transparently on the windshield of a vehicle, allowing drivers to keep their eyes on the road while accessing important information.The HUD is compatible with all car models and supports the On-Board Diagnostics 2 (OBD2) and Global Positioning System (GPS) dual systems. It displays vehicle speed, rotation speed, mileage, water temperature, voltage, and many other features based on the sensors of the car.This technology has become an essential part of the automotive industry, helping to improve safety and convenience by enhancing the driving experience. Additionally, this device is very user-friendly, easy to install, and provides an intuitive interface.One of the greatest advantages of having a HUD is that it allows drivers to focus on the road ahead. With all the necessary data displayed on the windshield, drivers no longer have to look down at their dashboard to check their speed or other details, making decision making easier.This device provides drivers with essential information such as the current speed limit, distance to an upcoming turn, and lane departure warnings. It also comes equipped with a speed alert feature that warns drivers if they exceed the speed limit.Moreover, the HUD technology can be tailored to every driver’s individual needs with customisable settings that allow the driver to choose what information they want displayed on the screen. Additionally, with GPS functionality, the device can provide real-time traffic data, notifications about the conditions of the road, and any hazards along the way.The Universal Head-up Display is ideal for truck and RV (recreational vehicles) drivers for it allows the drivers to access key information without taking their hands off the wheel. The HUD can easily navigate through the numerous gauges and screens that are present on commercial trucks, hence saving time and keeping the driver alert.In conclusion, the Universal Head-up Display is an innovative piece of technology that is changing the driving experience dramatically. With more manufacturers incorporating this technology into their vehicles, drivers can focus more on the road while accessing crucial data. This technology is an essential upgrade to any driver who values convenience, safety and efficiency while on the road.

Distance Detection Radar - Seeing Beyond Human CapabilitiesIn today's world, technology has become an essential part of our lives. We use it for communication, entertainment, and even transportation. However, one of the most significant uses of technology is in the field of defense and security. One of the most important tools used for this purpose is the Distance Detection Radar.What is Distance Detection Radar?Distance Detection Radar, as the name suggests, is a type of radar that is used to detect objects from a distance. It works by emitting electromagnetic waves at sub-optical frequencies, which bounce off the object and return to the radar. Based on the time it takes for the waves to return, the Distance Detection Radar can calculate the distance, speed, and direction of the object.How Does Distance Detection Radar Work?Distance Detection Radar works on a simple principle – the reflection of electromagnetic waves. It emits waves in a specific direction, which bounce off the object and return to the radar. The time it takes for the waves to return is calculated and used to determine the distance of the object.The technology used in Distance Detection Radar is based on the same principles as sonar, which is used to detect objects underwater. However, the waves used in radar are much faster than those used in sonar and can travel much greater distances.Applications of Distance Detection RadarDistance Detection Radar has a wide range of applications in different fields. Here are some of the most common applications:1. Military: Distance Detection Radar is extensively used in military operations for reconnaissance, surveillance, and targeting. It helps to detect enemy aircraft, ships, missiles, and other military assets from a distance, enabling the military to make strategic decisions.2. Aviation: Distance Detection Radar is used in aviation to detect weather conditions, other planes, and obstacles on the runway. It helps planes to land safely and avoid mid-air collisions.3. Meteorology: Distance Detection Radar is used in meteorology to study weather patterns. It helps to detect precipitation, storms, and other weather conditions, enabling meteorologists to make accurate predictions.4. Traffic management: Distance Detection Radar is used in traffic management to monitor and control traffic flow. It helps to detect speeding vehicles, accidents, and congestion, enabling authorities to take necessary action.ConclusionDistance Detection Radar is an important technology that has been developed to enhance our ability to detect and respond to potential threats. It has a wide range of applications, from defense and security to aviation and meteorology. Its ability to detect objects from a distance has made it an essential tool in many industries.As technology continues to evolve, we can expect to see more advanced Distance Detection Radar systems that are even more accurate and reliable. With the rapid pace of technological development, the sky is the limit for Distance Detection Radar.

Get Accurate Speed Readings with the Speedometer App for iOS Devices

Looking for a reliable and accurate racing speedometer for your iPhone? Look no further than the Speedometer app! This app is designed for racing enthusiasts and speed freaks alike, offering a range of features and tools to help you track your speed and performance.With the Speedometer app, you can easily monitor your vehicle's speed, distance, and time on a real-time basis. This app comes packed with several features, including a digital speedometer, GPS tracking, and a trip log. Whether you're racing on the track or just going for a casual drive, this app is perfect for anyone looking to monitor their vehicle's performance.One of the best things about the Speedometer app is its user-friendly design. The app is easy to navigate, with a simple interface that makes it easy to switch between the different features and tools. You can easily customize the app to display the information that you need, such as speed, distance, or time, depending on your preferences.The GPS tracking feature of the Speedometer app is also a great tool for racing enthusiasts. With this feature, you can track your location and speed in real-time, allowing you to monitor your progress on the track and make adjustments to your driving as needed. This feature is particularly useful for those who are participating in competitive racing events and need to closely monitor their speed and performance.Another great feature of the Speedometer app is its trip log. This feature allows you to record your trips and view detailed information about your speed, distance, and time. You can use this feature to track your progress over time and identify areas where you need to improve your driving or make adjustments to your vehicle.Overall, if you're looking for a reliable and accurate racing speedometer for your iPhone, the Speedometer app is a great choice. With its user-friendly design, GPS tracking, and trip log features, this app offers everything you need to monitor your vehicle's performance and improve your driving skills. So why wait? Download the Speedometer app today and start tracking your speed and performance like a pro!